Medical grade: AQL 1.5
Colors: White, Blue, Pink, Green, Orange and Grey
Surface patterns: Finger Textured and Fully Textured
Glove finishes: Powdered and Powder Free
Lengths: 245 mm and 300 mm
Palm thickness: 0.10 mm, 0.15 mm, 0.20 mm (4 Mil, 6 Mil, 8 Mil)
Sizes: XS-XXXL
-Coverall Suit
60 Gsm,PPSB Material
Having An Elastic at hood,ankle and wrist and a zipper
water and fluid repellent
single use only
light colour
-Gloves
Nitrile
None-sterile
powder free
Size (6.5″ / 7). 5 grms 3.5mil
-Shoe Cover
25 gsm PPSB pair of Shoe Cover
-Mask
3 Ply Mask
-Goggles
Military Grade Goggles
Indirect venting to reduce fogging
Disposable
-Coverall Suit
60 Gsm,PPSB Material
Having An Elastic at hood,ankle and wrist and a zipper
water and fluid repellent
single use only
light colour
-Gloves
Nitrile
None-sterile
powder free
Size (6.5″ / 7). 5 grms 3.5mil
-Shoe Cover
25 gsm PPSB pair of Shoe Cover
-Mask
3 Ply Mask
-Face Shield
Made Of Clear Plastic
Disposable
Fog Resistant
The Rak-FI03 thermometer provides fast, accurate and safe non-contact measurement . Thanks to the use of infrared technology, the measurement takes place at a distance of 3-5 cm from the body or the object being measured. The device has a readable, backlit liquid crystal display with three backlight colors (green, yellow, red), each assigned to a different temperature level. When a high temperature is detected, the device will signal with a sound signal. The thermometer has a built-in memory for the last 32 measurements and the ability to display the temperature in degrees Celsius or Fahrenheit. After a long period of inactivity, the device will automatically turn off to save battery.
Features of the Rak-FI03 non-contact thermometer
Measurement from a distance of 3-5 cm
Memory of 32 measurements
Large readable display
Three backlight colors (green, orange, red)
Beep when high temperature is detected
Automatic shutdown to save battery
Two measurement scales to choose from: Celsius or Fahrenheit
Body temperature measurement range: 32.0 – 42.9 ° C
Dimensions 83x145x42 mm
Weight without batteries 137g
Form – Liquid
Usage/Application – Disinfection
Grade – Chemical Grade
Packaging Type – HDPE DRUM
Packaging Size – 50 Kg
Broad spectrum – Effective against wide range of disease causing organisms including bacteria, virus, fungi, bacterial, spores, protozoa etc.
Safe and non-toxic to life.
Effective in presence of organic matter.
Longer residual activity. Environment friendly.
Should have minimum contact time.
Should not taint the surfaces, equipments etc.
Non-corrosive to the equipments.
Composition:
Chlorhexidine Gluconate Solution 20% IP 0.3% w/v
Strong Cetrimide Solution
eq. to cetrimide ip 0.6w/v
Isopropyl Alcohol – q.s.
USES:
Help to eradicate microbes on the skin.
Recommended for repeated Use.
Direction:
Place small amount of coroguard sanitizer in your palm. Thoroughly spread on both hand and rub together untill dry.
Warning:
This Product contains 60% isoproply alcohol so keep away from flame.For External use only
Available in – 5 ltr, 500ml, 200ml, 100ml
STRUCTURE – The Structure Will Be Pvc 19mm Hollow Sheet And Profile With Panel Box And Dispenser For Hand Sanitizer.
Paneling – Pvc Profile
ROOF – Pvc Profile
BOTTOM FLOORING – Na
ENTRANCE/EXIT – Pvc Clear Curtain Strips
WIRING – Na
ELECTRIC FITTING – Na
TOTAL WEIGHT – 40-45 Kg For 4’l*4’w*6.75’h
DISINFECTION CAPACITY/H – 5-6 Ltr/hr
SPRAY PORT – 6 Piece
RATED VOLTAGE – 220 Vac/50 Hz
MAX POWER – 300w
ATOMIZED PARTICLES SIZE – <4 Μ
CONTROL METHOD – Auto
APPLICABLE AREA – 4ft X 4ft X 7ft
AUTO SENSOR – YES
STORAGE CAPACITY – 200 Ltr Water Tank
Product Features
Fire Retardant
Requires 5-6 Liters Of Solution Per Hour Easy To Lift, Shift & Install
Waterproof Maintenance Free Easy To Refill
Corrosion & Termite Proof
Specialized Harmless Disinfectant Solution Perfect For High Crowded Area
Supervision For Sanitizer Bottle At The Exit Of Every Walkthrough 200 Liter Storage Tank For Storing Of Disinfectants In The Tunnel Low Power Cost